This topic has been archived. It cannot be replied.
-
工作学习 / IT杂谈 / 请教:ROGER双机共享路由器上网问题我用一个路由器接两台机上ROGER,以前一直工作正常,最近忽然不行了,将其中的一台机直接接ROGER MODEM可以上网,而另一台机直接接MODEM也不行,检查路由器的设置,发现WAN无法获取地址,请问什么原因?谢谢!
-gzhuang(gzhuang);
2003-9-27
{185}
(#1388289@0)
-
They use your MAC address to validate for DHCP. You should be able to setup the fake MAC address in your router exactly like the network card worked.
-jchonc(James);
2003-9-28
(#1389394@0)
-
thank u ,James, My route can only config one MAC, but i have two PC, which MAC may i config ? or how can i cofig two MAC into route?
-gzhuang(gzhuang);
2003-9-28
(#1389450@0)
-
You only need to set 1 MAC. (The one worked if direct connect to modem)
-jchonc(James);
2003-9-30
(#1392483@0)
-
把可以上网的那台电脑网卡的MAC地址clone到Router上。
-lmx(流氓兔);
2003-9-30
(#1392501@0)
-
As I know Rogers does not care about the MAC. Should be problem with your computer's configuration.
-enchanted(π);
2003-10-1
(#1393894@0)