This topic has been archived. It cannot be replied.
-
枫下家园 / 生活杂事 / 求教: 我的录像带开头部分卷带了, 请问: 我怎样才能把卷坏的部分转出来?
-rollor(Rollor);
2001-12-16
(#300427@0)
-
不知道你的转出来是指转录还是旋转？若是想手工旋转带子的话，用一根笔芯插入盒子反面的一个小孔，顶开那片弹簧就可以用手转转轴了。
-doors(道士);
2001-12-16
(#300462@0)
-
谢谢各位。在带子背面找不到道士说的孔，只好按Egg说的拆开外壳，花了二十分钟才装回去。现在总算知道那个有弹簧的孔在哪儿了。
-rollor(Rollor);
2001-12-17
(#301233@0)
-
拆开外壳，无论录像机还是录像带。
-eglington(eglington);
2001-12-16
(#300464@0)
-
My favorate tape was destroyed by my doing so: 1 There is a little strange screw than cannot be removed by normal screw drivers; 2 Many small parts will fall out before you have time to see their position.
-piglet(spring);
2001-12-16
(#300578@0)
-
打开外壳并不会造成损害，关键是下手拉带子时要稳准，不要狠.
-eglington(eglington);
2001-12-16
(#300582@0)
-
The problem was I could not re-asemble the tape.
-piglet(spring);
2001-12-16
(#300616@0)
-
如果是要从VCR里取出来，则只能因地制宜了。先用手试着从各个角度轻轻地往外拉，实在不行可将VCR外壳打开，则肯定可以取出来。一般的VCR开外壳不影响里面的精密零件。
-doors(道士);
2001-12-16
(#300466@0)
-
Yes. 卸下VCR顶部的铁壳, 然后就看到带子了.
-piglet(spring);
2001-12-16
(#300647@0)
-
Ha ha, rollor also has something that he cannot do!
-tropicalfish(想吃小笼的恐龙);
2001-12-16
(#300474@0)